Crafts | VP Diaries

New Christmas Tree Skirt

Posted on December 15, 2017February 13, 2018 by vpdairies

I’m slowly redoing my home with mid-century modern furniture and accessories. So far, the living room and dining room are looking pretty good. I still need more accessories but I can do that slowly so I can get the pieces I really want.

As part of the make-over, I decided I needed to think about changing up my Christmas decorations too. The first thing I thought about was my Christmas tree. After all, the tree is the show piece of everyone’s Christmas decorations.

My first purchase? A silver tinsel tree. That was the iconic tree of the time period. There was no way I could afford a real antique one — mid-century modern is so freaking expensive. I started looking online for a reproduction. Ugh! The ones that look most like the originals are still too way expensive too, even a smaller one that would fit nicely in my apartment. I’m going to have to save up for one of those.

What I did find was an inexpensive one on Amazon, it is no longer available so I can’t provide a link. I also started looking for a tree topper. I knew I wanted one of the atomic looking ones. Again, the real thing was out of my price range. However, I was luckier finding a really great reproduction. I found a great 11 ½ inch starburst on Amazon. I was worried that it wouldn’t look as good as I hoped. However, it is perfect.

Then I got out the ornaments I used last year. While not being particularly MCM, I found they looked just fine. I’ll eventually get new ones but these will work this year.

Finally, the only thing missing was a great tree shirt. I couldn’t find any originals, within or outside my price range. I looked for reproductions but the few I could find still were not within my price range. So I decided to make my own. I started looking for mid-century modern fabric to use. While there is quite a bit of MCM fabric out there, the amount of Christmas fabric is limited. I couldn’t find anything I liked. The piece that kept coming up in all my searches was this piece with birds sitting on a limb with an orange background. I mean, really, orange? For Christmas? I love orange. I love mid-century modern. But I do not love mid-century modern orange Christmas fabric!

So, after doing more research, I decided I would make one out of felt. I knew I was going to be really busy at work, so I went to my old standby (and favorite) retailer, Amazon. I purchased the following materials:

My idea was to make the skirt itself from the red felt and then use the multi-colored swatches to make cutouts of mid-century modern ornaments to place around the skirt. I figured it would take me “no time at all” to have the tree skirt finished and under the tree. Oh boy, was I wrong. Cutting out the skirt turned out to the easiest part of this little endeavor.

First, I measured how far far I wanted the tree skirt to hang. I decided on 12 inches. Then I cut a piece of the red felt that would be large enough for the size I wanted. I folded it in half, half again, and then again until I had a nice little triangle that would make it easy to cut a circle. Using the tape measure, I measured out 12 inches along the edge. I cut along that edge to make the circle. I then cut off the tip of the triangle to make the hole for the tree trunk. I unfolded the circle and trimmed any unevenness in the outer circle so it was nice and round. Finally, I cut from the outer edge to the middle to make the opening so I could put it around the tree. That took all of about 30 minutes.

Then I started working on the ornaments. I did a lot of researched, looking for what ornaments looked like during that time period. Then I tried to cut them out and decorating them freehand…with mixed results. A few turned out okay, the rest looked like total crap. I was really disappointed. So much for thinking it was going to be easy.

So, I started looking for printable ornament patterns. I found a number I really liked and went to print them out.

Aannnddd, my printer decided it wasn’t going to recognize the color ink cartridge. I couldn’t print them out even though I had it set for black only. UGH!!!!!! With Christmas being so close, I really wanted to finish the tree skirt.

So I resigned myself to going to Just using it plain and working on it again after Christmas.

In the meantime, I was also collecting a few other MCM Christmas decorations. I found a couple of felt stockings on Amazon that were kind of cute. When I got them, I thought they were cute, not great, but would be good enough for now. But then I went to Lowe’s, I found some I really wanted. So, I snapped up two at 50% off along with a matching door mat.

I was going to just throw the two felt ones away (I’d only bad $2-3 for them) since the loop was already looking like crap because I used tape to hold them to the front of my TV credenza. But the more I looked at them, the more I thought that I could use the figurines (Santa and a reindeer) on the front for my tree skirt.

I cut out the reindeer, Santa, the candy cane, and the Ho! Ho! Ho!.

I placed those around the tree skirt, as well as the few ornaments I thought were decent.

After gluing everything down. I placed it back under the tree. It looks fairly nice and, overall, I like it.

Is it want I want forever? Definitely not. But it’s cute enough that I now have the time to find the PERFECT tree skirt.

DIY Washi Tape Storage

Posted on November 29, 2017November 30, 2017 by vpdairies

If you remember the post glue gun storage, I said that I was going to be making washi tape storage that would coordinate with it.

It took me a while to get back to it but I finally got back to it. This is what I needed for my washi tape storage:

(You can see the glue gun storage in the background.)

8×10 picture frames
Rule
Utility knife
Set of three storage baskets, blue
Small easel
Double-sided tape
Glue gun and glue sticks
Craft paper (same as I used for the glue gun storage)

The first thing I did was take apart the picture frame.

I used the back piece to measure the background paper. So that the cuts were very clean, I used the utility knife.

put double-sided tape all over the back of the paper to adhere it to the back of the picture frame, like I did for the glue gun storage.

I put the picture frame back together, using the glass but not the ‘picture’ that comes with the frame. I used the glass so I’d have something to glue the baskets to. Then I ran a line of hot glue around the back to make sure the back didn’t fall out.

I put the picture frame in the easel just to see what it would look like. Thankfully, I did because it pointed out a few things.

As you can see, the picture frame leans back pretty far. I don’t like the look of this. I don’t like it one little bit. I have to find a way to get to sit more upright.

I’d planned on gluing the first basket on the bottom of the frame.

Welllllll, that’s not going to work because the bottom of the frame is inside the easel. Time to rethink the basket placement.

I don’t know if you can see it in this picture very well but the front part of the easel was wonky. While one side of the front brace rested on the table, the other side did not. UGH! Why didn’t I check that before putting in my basket? Or maybe I did and it got bent while it was in the bag…who knows. But now I have a problem to solve.

So, I got out the tools and started pounding and twisting and squeezing. It got a little better, enough that I’m good with it.

I still need to make it sit more upright…thinking….thinking. But at least it is sitting flat against the table.

After doing a lot of thinking, I located a small piece foam. It wasn’t ever thick but I thought it was big enough to cut in half. I the first half to the back of the frame and then glued the second half to it. I’m concerned that it won’t be thick enough to make a big enough difference but we’ll give it a try.

I then glue the baskets to the frame. I forgot to take pictures of the whole process…of course. But here is a picture of all them already on. I tried to put enough space between each basket so that I could easily get the rolls of washi tape in and out. I think it looks pretty nice.

This is what it looks like with all my washi tape in it. I tried to group them by color, starting with the lighter ones on the top row and the black/brown ones in the bottom basket.

I didn’t get a picture of the angle of the frame but I think it still leans back to far. I need to find something else to glue to the back to make it stand up straighter.

Thinking…Thinking…Thinking

Update

I found something to add to the back of the frame so it will stand up straighter. It’s a piece of Styrofoam.

After gluing it to the back, the storage stands up pretty nicely. I’m really loving this now.

And finally, here’s a picture of the glue gun storage next to the washi storage. I think they look nice together. 🙂 However, I just noticed that the top basket is a little crooked…I’m going to have fix it fairly soon because it will drive me nuts until I do.

DIY Glue Gun Storage

Posted on November 4, 2017December 17, 2017 by vpdairies

As I get more into crafting, I have started setting up a small corner of my bedroom as my crafting area. I’ve purchased a whole bunch of things for area, which you’ll see in other posts.

Two things I really need is something to store my glue gun in when it is still warm and something for my washi tape. I decided to tackle the glue gun first.

I looked on Pinterest and YouTube to see what I could DIY. I found one I really liked that used items I could buy from the Dollar Tree. One of the required items was a plastic napkin holder. However, no matter how many times I went looking for it, I could never find the napkin holder. I found all the other items but not the napkin holder. So, I went looking for another idea. I found it on coupontoprovide’s YouTube station. I already had most of the items, the only thing I’d need from the Dollar Tree was a picture frame.

Well, today I finally got around to making the holder.

I pulled together everything I needed:

Picture frames – I show two here. The 5×7 is for the glue gun storage and the 8×10 is for washi tape storage.
According to couponstoprovide’s directions, I was supposed to use a 3×5 frame but I wanted something a little larger so I could see more of background since that is how it will coordinate washi tape storage.
Ruler
Needles and thread
Silicon pot holder, green
Glue gun and glue sticks
Craft paper – I pulled a few options. I wanted the background for the glue gun and washi tap storage options to match. I have the green pot holder and blue baskets for the washi tape.

The first thing I did was take apart the picture frame. I set aside the glass because I won’t be using it in this project but I want to save it to use in another project sometime in the future (maybe).

I used the back piece to measure the background paper. I decided on the multicolored chevron. I used the utility knife so the cuts were very clean.

I put double-sided tape all over the back of the paper to adhere it to the back of the picture frame.

Now I needed work on the two pockets. First, I needed to cut the silicon potholder in half. I found the middle by using my mat. Then I used my ruler to make sure the cut was straight and made the cut using the utility knife.

Now, I needed to make each half into a pocket. I started by rolling the first half into a tube and sewing the two sides together.

Then, I sewed the bottom together.

This was actually easier than I thought it would be. I just had to find the right needle and a pretty strong thread. The first needle I picked was nice and heavy but it had a blunt point, which I figured would be difficult to push through the silicone and would definitely not make it through the back of the picture frame. So, I found another one that had a nice sharp point and heavy enough.

I finished the second pocket. I placed both pockets on the backing to figure out where to place them. So far I’m liking what I think this will look like.

To sew through the back of the picture frame, I pushed the needle through the front out the back, but I wanted the thread knot to be in the back, so after I made the hole, I withdrew the needle and used the hole to push it through from the back. It was pretty each to push the needle through from the front to back but much harder from back to front, mostly because I couldn’t see where it was going to come out. I ended up making the holes from the front when I needed to come through from the back. After I got the top sewn down, I repeated the process with the bottom of the packet.

After I repeated the whole thing for the 2^nd pocket, I put some hot glue on the back to secure the knots.

Then I had to put the frame back together. I put the back in the frame and ran a line of glue around the edge to make sure it didn’t fall out.

Then I put in the cardboard and matting from the front to add bulk for the metal closures. I also ran another bead of glue around the edge of the cardboard piece for even more security and put the piece of matting over that to cover all the messy stuff. And finally, I pushed the little metal brackets back down to hold everything in.

So, what do you think of the final product?

I really like it. It holds a nice supply of glue sticks and my glue gun very nicely. The really nice thing is that I can put the glue gun in the pocket while it is still warm since it is silicone. And it any glue drips in it, I can just scope it out once it is cool. And I think it looks really nice on the corner of my desk (close to the outlet).

Knit Along Shawl, Part 2

Posted on June 14, 2017June 16, 2017 by vpdairies

I’ve finished the first two sections of the shawl (Knit Along Shawl, Part 1), and it is time to move on to section 3. I took a very short break after finishing the first two sections, just one day. I started section 3 of the next evening.

This section was a combination of stockinette and the lace stitches. I thought this section would go much quicker since I was in the groove for the pattern. However, it was not. Since there are four stitches added every front side row, it is getting rather wide. But still it went together in not too long a time.

After taking a few pictures, I started on the last piece, section 4. This section is mostly just the lacy stitch.

I got a few rows in and I noticed I was a stitch off one side. So, I fixed that. A row or two later I noticed I was a stitch off on the other side. So I fixed that one. Then I was another stitch off. It was driving me absolutely mad! I got so mad, I just ripped out the entire thing! I just rolled the yarn up in a big ball so it would be ready when I decided to start it up again. I couldn’t start again right away because I was just too ticked off to be careful enough.

I still wanted to finish the shawl on time, so I started again the next day. The first night I was able to reknit sections 1 and 2. I did section 3 the next night, which left section 4 for the third night. I have to say, I just love, love, LOVE this shawl. I love the pattern. I love the yarn, which is very soft and easy to knit with.

I finished the 4th and final section. It was difficult to tell exactly how wide the shawl was at the top due to it being on needles. I didn’t want to take it off the needles because I knew I wanted it to be nice a fairly large. It just didn’t seem big enough.

The picture below shows the shawl completed as far as the pattern was written. After some thought, I decided to knit part of section 3 and all of section 4 again (as shown).

This was getting really, really wide but I think it was the perfect decision. When I finally finished it, I think it is just exquisite. Even my daughter likes it, and I think she has only ever liked one thing I’ve knit her and that is a huge round afghan.

This picture shows the shawl stretched out on my queen size bed. It went all the way from the top of the mattress to the bottom. 🙂

And here is my daughter modeling it for me so I can get a picture.

GORGEOUS! GORGEOUS! GORGEOUS!

Stone Trivets

Posted on March 29, 2017March 30, 2017 by vpdairies

I was bored. I hate it when I’m bored because I usually do stupid things like eat too much. And since I’m trying to lose some weight, I like to make sure I’m not bored.

So, I started looking for something interesting to do that wouldn’t cost me too much, as it was in between paydays. I had no idea what I wanted to do or what I had the materials to do. I don’t have a lot of supplies here in Arizona yet but I look through those that I had. It was sparse.

So then I started looking around on Pinterest. I kept seeing these trivets made with small rocks or stones. The posts I saw had the small rocks hot glued to felt. I liked the idea of the stone trivets but really thought the felt would just be too floppy.

I had purchased a set of four cork tiles a while back. I had thoughts of making my own corkboard but just never got around to it. And now I’ve found one I really liked on Amazon, and purchased it. I decided the cork would be a good base for the trivets. I also knew that a great place to get the stones I needed was at the Dollar Store.

I made a quick trip to the Dollar Store on Saturday and picked up a couple of bags (along with a few other things I couldn’t seem to live without). Does anyone else have that problem? You go in to the store for something specific and come out with a couple of bags of stuff. And half the time, I forget the item I actually went in for.

So today, I gathered up my supplies and started to work. I thought about using one of my luncheon plates or soup bowls as the pattern for the trivets. However, the soup bowls were too small and the luncheon plates weren’t round. Exactly how did I not remember my plates are square? But I did find the top to the canister I keep my tea in and figured it was just the perfect size. This is actually supposed to be the flour canister but I drink a LOT of tea. My flour I keep in plastic bags so I can store more in a smaller space, while not having to worry about bugs getting in it.

I traced around the outside of the lid to form the circle.

After cutting it out, I placed the rocks around trying to get the most coverage and an fairly even top.

After cutting it out, I placed the rocks around trying to get the most coverage and a fairly even top.

Then I started gluing them down. And let me tell you, it is not as easy as you would think it should be to try to glue them down in the same place where I’d placed them while the designing it. The rocks kept scooting around and slipping. In the end, I just did the best I could at putting them back where I thought they went.

And here is what it looked like at the end. Now, I’m really glad I used cork for the base, because even though you can see it, it looks like it goes with the rocks.

For a first try, this isn’t bad. But there seems to be too much space between the stones. I wish I had some very, very small rocks to put in-between the bigger ones, or sand, or just something.

I had enough cork left over for another round trivet, so I went ahead and cut it out. However, I really wanted to use one of my plates as the pattern since I liked the shape – obviously since they are my plates. But once I cut it out, it really didn’t end up looking all that different from the round ones.

I ended up giving one of the round trivets to my neighbor. She loved it. I gave the other round one to my daughter. She wasn’t all that impressed. In fact, her comment to me was “Getting crafty there, Mom?” She is really not into home made things unless it is her organic face wash, body wash, and other beauty products. Her partner and his son both loved them. Marcus wanted it for himself. Bronwyn said he carried it around all night.

Personalizing My Picture Frames

Posted on March 13, 2017May 28, 2017 by vpdairies

The walls in my apartment are really bare. I mean I have a clock with a couple of elephant heads and a mirror. All on institutional off-white walls. Zzzzzzzzzzzzzzzzzzzzzzzzzzzzz

I’ve bought a few things to put on the walls but just haven’t gotten around to them up. I think I got caught in trying to make sure everything was going to be perfect before moving forward. And ended up never moving at all. Plus, I’m a procrastinator. I mean, I could win a gold medal in procrastination. One of my favorite movie lines is from Gone with the Wind, Scarlett O’Hara saying, “I’ll think about it tomorrow.” I can definitely get onboard with that. I’ve tried to find a way to stop procrastinating but I keep putting that off. I see a trend here….sigh

Well, something happened that, at least with this project, has made me decide to get my tush moving and get things up on the walls. My mom came for a visit around Thanksgiving and brought two very cool things for me. The first is my original birth certificate. I mean this is the one signed by the hospital when I was born too many moons ago. The other is a picture of me from the front page of the Columbus Dispatch, also many moons ago. Being on the front page of our largest newspaper (we actually had two at that time) was my 15-minutes of fame.

The first thing I started looking for was some picture frames I really liked. That is so much harder than you would think it would be. I mean, there always seems to be so many options. Who knew it would be so hard to find picture frames but nothing was what I liked or was willing to settle for. First, since I’m going mid-century modern, I needed something with clean lines. When I could find something with clean lines, it didn’t come in a color I liked. I mean, I dislike black a lot, which is the predominant color. I don’t like silver or platinum either. I am much more of an earth tone type of girl. I love browns, ivory, gold, bronze, orange, all those earthy tones. I needed something with more color and substance. I kept looking and looking and looking. I couldn’t find anything I really liked. I was really afraid my procrastination habit would kick in and I’d remember to start looking for pictures frames again sometime next year. I kept my motivation going to find the perfect picture frames. I considered this a major accomplishment.

I kept returning to this one set of seven frames I found on Amazon. They had the clean lines I was looking for, a variety of sizes for different uses, and, most importantly, a price tag I could afford. The only problem was they only came in silver. Why couldn’t they come in wood, matte gold, bronze? Anything but silver!! What is the solution? Rust-oleum, of course. I purchased a can of Hammered Copper Rust-oleum so I could make my picture frames a color I liked instead of settling for a color I don’t like. And they will go with the raised copper pipe plant stand, copper legged plant stand, and the copper pipe and leather wine rack that are on my To Do list.

With living in an apartment, spray painting the frames has to be done one at a time. I kept the box I used when I updated my cart. I had stored it in my outdoor storage closet because I just knew it would come in handy later. This can make the project drag out but it keeps management from yelling at me for tie-dying the porch.

I got notification from Amazon that my frames had been delivered but the paint wasn’t coming until the next day. I live at the back of my apartment complex, while the office and the mailboxes are at the front. It is part of my routine to take my dog for a walk up to the office to pick up the mail. This way we both get out in the fresh air and get some exercise. When I know I have packages, I carry a reusable bag I got from JoAnn Fabrics. After getting the mail from the mailbox, I went to the office to get my package. I walked in and immediately saw my box…and immediately knew there was no way that box was going to fit in the bag. The office manager suggested I open the box there and hopefully whatever was inside was small enough to fit in my bag. Sure enough, the Amazon box was much bigger than the box inside.

After unpacking the frames, I decided that the 17” frame would be the first one I would paint. That would be the one for my birth certificate. I ripped off the plastic, turned it over, and saw all the pieces I needed to remove to get the glass out. The corner pieces weren’t difficult to remove but the other ones…now those were a pain. A couple of them came out fairly easily, but the rest were a chore.

I eventually got them all out and removed the cardboard, the really bad picture, and the matting. However, I found that the glass was glued in using rubber cement. I couldn’t get it out. That put an end to the idea to take it out before spray painting it. So, now I needed to come up with a backup plan. Simple, cover the glass with paper.

I then got out my box and risers from my previous spray painting projects. I only had 4 risers left so I could only spray paint one frame at a time. I am concerned about this because, with the delays, it is very possible my procrastination gene could kick in and I’ll finish painting these next year (if ever). It took a couple of coats but it ended up looking exactly like what I was looking for.

I love the way my birth certificate looks in the frame. However, as I was admiring my handy work, I noticed a little bit of paint on the glass. I wasn’t sure how I was going to get if off. Then I thought about the disposable razors I had. I got one and hit it with a hammer. The razor was very tiny but I could hold it without cutting myself, and it was bendable too. And it worked. I was able to scrap all the paint off. However, when I was putting everything back together, I noticed there seemed to be a fine film of paint on the inside of the glass. Well crap! I couldn’t take off that with my little razor blade. I went and got my nail polish remover. I ran a cotton ball of remover all over the inside of the glass and the film was gone. Then I spent even more time cleaning the glass to remove any trace of the acetone.

And there it is!

The next frame I painted was the one I planned on putting the newspaper picture in. Luckily the smaller frames didn’t have as many things on the back as the big one did. They only had braces on the corners. So much easier to get them out. And the glass came out of frame. But for some reason, it didn’t dawn on me that I could leave the glass out when I painted them. I just covered the glass with paper and painters tape, put it back in, and then put the ‘fake’ picture back in to protect the back of the glass. I really think I just made my life harder than it needed to be.

Going in, I knew I wouldn’t be able to use the matting so I needed to find something to go behind the picture to frame it out. I remember I had a bunch of scrapbooking paper and really hoped I could find something that looked mid-century modern in the packet. I came up with a few alternatives. The first options had orange in them and seemed to have that mid-century vibe. The second option were my teal options. I laid the picture on each of the options to help make my decision.

I ended up with the second of the orange options.

I’m still working on the other frames. I’m not sure where I’ll put them all but I have found a location for my birth certificate and my newspaper clippings.

Cart Update, Part 2

Posted on February 20, 2017March 30, 2017 by vpdairies

My honorary grandkids came over today since school was closed for a long weekend. (Don’t get me going on how they don’t fund the schools here so kids are out all the freaking time so they can reduce costs.) Any way, the boys and I had a good time. We talked about what they wanted for Christmas (which is a ways out still), watered the plants, and they played Minecraft for hours and hours because I was working.

After I had finished working for the day, Junior asked if we could paint the cart. We decided to go for it. While he continued to play Minecraft, I started prepping the cart for paint. First, I gathered everything I thought I would need: sandpaper blocks, Goo Gone, paper towels, cleaners, and a screwdriver. I started just cleaning the whole thing since it has been sitting around for a while. It was a little dusty and had some dog hair on it. I keep telling Cian that he needs to keep his hair to himself, he is causing Mommy a lot of work but he just doesn’t seem to understand that concept.

After cleaning, I went to work on a couple of places that had stickers or tape. The first place was just one of those stickers you get on your banana or pepper. I tried using the sandpaper on it but that didn’t work very well. Then I tried using the Goo Gone but that did absolutely nothing. So I finally decided to just use the good ole’ screwdriver and scrap it off. That worked really well on the paper portion of the sticker. And the Goo Gone worked really well on the glue. One sticky place down, one to go.

The second part was on the handle where they decided to use a bazillion yards of tape to keep the price tag on. I mean, they just wrapped and wrapped that tape around the handle. So first I had to figure out where the tape started and ended to see if I could start there to unwrap it. That didn’t work…they’d wrapped it back on itself. I finally found a little pucker on one end of the tape. I got out my trusty screwdriver and went to work. It took a little while but I finally got the tape and price tag off. Used a little more Goo Gone and, Woo Hoo, I was ready for the next step in getting the cart ready to redo.

That is also where I ran into a major stumbling block. With my screwdriver in hand, I started to unscrew the handles from the trays. HUH! Nope, that wasn’t happening. Those screws were NOT going to budge. They didn’t care that I was ready to work. They didn’t care that I wasn’t going to throw them away but put the whole thing back together again once I finished painting everything. They just plain didn’t care. Markus decided that he would try, because being a 7-year old, he believes he is strong enough to take on anything. Huh, again nope. Junior took a break from playing Minecraft to give it a try, because being 9 is so much better. We finally just stared at the thing, ready to kick it, when Markus says, “My dad can do it. He is really strong.” That worked for me! Well, when Alfonso got here to pick up the boys, he couldn’t get them undone either. What he did notice is that we needed a wrench or ratchet set to undo the nuts on the back side of the screws. That was what was holding them in so tight. Alfonso said he would come back this weekend with the right tools to help me.

Friday was a vacation day for me so my friend, Sawnya, came over with her son to hang out. Later in the day, her husband showed up and we were talking about the cart. He took a look at it. He agreed that the nuts on the inside needed to be loosened and said he had a ratchet set in his car. He set to work, and in no time at all, my cart was laying on the floor in pieces. Thank you, Nick!

Looks like I have more cleaning to do because the bottom of those shelves look to be in pretty bad shape!

I waited until the next day but I now have all the shelves and the handles sanded and cleaned up. I’m ready to go. Then I start thinking, “Where am I going to do this?” I mean, I live in an apartment. So, there is no basement to use. I could take it outside but I don’t think the management would appreciate it much it I got paint all over my patio, or their grass or rocks (they use a lot of rocks out here in southern Arizona), regardless that I think Satin Lagoon is really pretty. Maybe I could take it over to my daughter’s place. I know she has a drop cloth I could use in her garage. But that means I won’t be able to start until I can make those arrangements.

Then I see it – that huge box sitting in my living room. I just got a shipment from Amazon of pillow inserts and they came in a great big box. I guess this is one time that be slow to take something out to the dumpster (read as just being lazy about it) is going to pay off for me. I open up that box and use it on my patio. Cian is finding the whole thing fascinating.

The one thing I bought when I first decided to do this project were these things called Painter’s Pyramid. I was worried about the edges of the shelves looking good.

And these are doing exactly what I wanted them to do! They keep the shelves up off their edges so I don’t have to worry about the paint making the shelve stick to the box. And they have turned out to be very handy when I turn the shelves over. I don’t have to worry about putting the new paint down on the cardboard. It just sits on those little points.

Everything seemed to be moving right along. I started painting while participating in my favorite Saturday habit, watching college football. And that worked out great b because I needed to wait at least an hour before putting on a second coat. So, I’d put on the first coat during the pre-game yakking, then a halftime I would put on the second coat. And when the game was over, I could turn the shelf over and spray the bottom. I decided to only use one coat on the bottom, because it was the bottom. It didn’t need to be perfect like the top. I still made sure everything was covered nicely but one coat was enough.

Since I could only do one shelf at a time, it took most of the day to do two of them. Which is when I noticed another little problem. I really thought that one can of spray paint would be enough. As I was shaking it after doing the bottom of the second shelf, I noticed there didn’t seem to be too much paint left in the can. Definitely not enough for the last shelf. Well, just fudge!!!

In order not to waste time, I decided to do the handles. I stood the box up against the patio wall and balanced the handle inside there. This turned out to be the perfect solution. I could only do one handle at a time and just had time to do one handle before it got too late. It did take two coats on both sides of the handle to make it look really nice. And now the inside of the box reminds me of the Tin Man from the Wizard of Oz.

For the night, I didn’t want to stack them up because they hadn’t had the time for the paint to really set. I was really afraid that leaning them up against each other would cause them to stick together. I ended up balancing the two shelves on the corners of the patio wall and left the handle in the box so they had a nice curing time.

I’m still waiting to get a new can of Satin Lagoon so I can finish painting the shelves. But in the meantime, I was thinking about how good it was going to look when I got it all back together again. And it hit me. What in the world did the screws look like? I mean, the shelves and handles both had rust and scrapes on them, chances are the screws were too. The screws and nuts were in a baggie on the counter so I took a look. Sure enough, they looked very sad… I needed to find a box or other piece of cardboard I could put the screws in so they would stay stand up. Don’t they look gorgeous now?

I got another can of the Satin Lagoon and finished painting the trays. Now the cart is ready to be put back together!

It took a while but I finally got my friend, Nick, to come back with his tools and put my cart back together. I just absolutely LOVE it. It is everything I envisioned it would be.

Thrifting

Posted on February 7, 2017August 13, 2017 by vpdairies

Valerie and I plan this blog post to be the ongoing documentation of our great finds when we go to thrift stores, garage sales, junk shops, or wherever we can find good deals.

July 29 (Peggy):

My neighbor and I decided to go thrifting. She was looking for something to throw on the couch to keep protect from her very young granddaughter. I wasn’t really looking for anything in particular but thought we might end up at the Dollar Tree, where I did need a few things.

I am sooooo glad I went with her. We hit two different thrift stores. At the first one, everything in the store was 20% off and I had a 10% off coupon too. I found a pair of Ray Rachel EVOO and vinegar cruets. They don’t have the stainless steel pour spouts. At $2.00 piece (before discounts), I figured I could get those on Amazon. I also found a pretty cool wine thingy. Not sure what you call it but you put the wine bottle in it so you can pour in a cool looking thingy. It was $2.00 too. All together, with discounts, l three items only cost $4.20.

Update: To make my Rachel Ray cruets useful, I went on Amazon. I found a set of six pour spouts for only $6.99. I gave them a really good washing and then waited for the pour spouts to arrive. It only took two days and they were here. I put my olive, grape, canola oil blend in the larger cruet and olive oil in the smaller one. I just LOVE them, especially since they ended up costing me on $5.13!

We then went to the Goodwill. The daily color was orange, which means anything with an orange price tag was 50% off.

The clothes are at the front of the store. I always look to see if I can find shorts or Capris my size. I found two pairs of Capri pants and a pair of shorts. One pair of the pants and the shorts had an orange tag. Woo Hoo!!

We headed back to housewares…and I hit the mother lode. First, I found a Paderno 4-blade spiralizer that looks to be almost new. It has everything in it and two of the blades still have the plastic protective tape on them. It was only $2.99. I looked on their website and found out it goes for $49.99. I got a really great deal. It doesn’t have the manual/recipe booklet but, if I can’t find it, it won’t be that big a deal.

The finally thing I was a really nice Brita pitcher. It also was only $2.99. I’ve been trying to get my neighbor to buy a Brita instead of all the bottled water she buys. She is disabled and has limited SNAP funds. While bottled water is covered by SNAP, my thought is why should she waste that money on bottled water when she just needs a pitcher with a filter. I didn’t let her know it was for her because she wouldn’t have let me buy it. I already have a Brita but it is just the plain one with green reservoir instead of white. This blue pitcher just needs a really good washing and, with the filters I gave her, she’ll be able to try it for a couple of months.

July 22 (Peggy):i

Mom was here for a visit and the one thing she really loves to do is go antiquing. Our favorite antique store closed recently, so we had to find some new ones. We found a few very close o the house. So Mom, Bronwyn, and I were off for our adventure.

The first place we found was the Antique Village Mall. It was one of those antique stores with multiple stalls. The great thing? They were having a 20% everything at every stall but one. I found a couple of things I really liked but I had to narrow it done to just one. I ended up finding this really cool Royal Haeger. Royal Haeger is a well-known for their MCM pottery, and this one is the perfect color for my living room. Mom and Bronwyn didn’t find anything that they couldn’t live without even though there was much more stuff there that was their style then mine.

Then we went to a store called Deja Vu Too. It was a much smaller store but she had a lot more MCM stuff for me. Bronwyn found a couple of antique herb cutters (or whatever you call them). Again I found a number of items that I would have loved to buy but I narrowed it down to just one. ;-(

Our final stopped was at the Antique Resale Market Place. It is partial an antique store and partial resale/commission sales store. The vast majority of the merchandise was southwestern (which is any of our styles). I did find a bedroom suite that I would die to have. It was the whole thing: dresser, chest, night stand, headboard, and 2 mirrors. It was GORGEOUS! I told mom she needed to win the lottery so she could buy it for me. They had each piece priced separately, so we added it up. Overall, it would cost about $2500, which really isn’t bad for an entire bedroom suite…but alas, still out of my price range.

However I dd find a few things I decided to buy, stainless steel serving pieces that match the ones I purchased previously (see below). The divided and rectangle platters were fairly inexpensive. The bowl was only $4 and on sale for 50% off. I do love a good deal!

May 21 (Peggy):

Another long stretch between thrifting sessions.

Yesterday, my neighbor and I decided to make a trip to Goodwill. She had a few things she was looking for specifically, and me, I just go looking for deals. And I was lucky enough to find a few things. Update: I use the bottle in my bathroom to hold my mouthwash. It’s perfect and makes the counter look less cluttered.

I also found a nice Vera Wang top. I checked it over really well to check for stains, rips, and the like. It looked in really good shape, so I snapped it up.

The best part was that, as we were looking around, they came over the speaker and said that all donated items were 50% off. Talk about being in the right place at the right time! So, I got out of there for less than $8.00.

March 17 (Peggy):

It’s been a while since I’ve been thrifting. I don’t know why its been so long but…

This weekend I had a reason to go. I’m going to be dying some yarn and I needed a pan that I don’t use for cooking food. I don’t have any extra pots that I don’t use for cooking, so I knew I needed to hit the thrift stores to find an inexpensive pot. I went to one Goodwill and found 2 but they were both $13. There was no way I was spending $13 for one pot from Goodwill. So, off to the next thrift store.

And there I found what I was looking for…and more.

The first thing I found was a nice MCM looking lamp. I’ve been looking for a lamp for my bedroom and this one is really nice. The shade, while very cute, just doesn’t go with my current or planned color scheme but it will work until I can decide what I want for the long haul.

Next, I went to the look for a pot. I found this really nice one for only $7. I snapped it right up. This will be perfect for dying yarn.

The last thing I found was this cute little round vase. I love the shape and lines on it. Not sure about the color though. It’s sort of a dark peach. I wish it was more orange. It may be something that won’t stay. We’ll have to see.

Feb. 4 (Peggy):

I went to Goodwill again today. There wasn’t a whole lot but I got a couple of really nice wine glasses. One has opaque dots and the other as a frosted stem. This gives me a total of 6 wine glasses, every single one different than the others. The more I look at the one with the frosted stem, the more I think I may re-donate it but for now, it is in the cabinet.

I also found this really nice amber colored bowl. I’m not sure I’m in love with it, or what I’ll do with it but for only $4 (and it was half off that), it was a good buy. If it ends up not really fitting in with my future plans, I’ll just donate it again so that someone else can use it.

The final item I found was a square, white plate I found really interesting. Since my dishes are white too, this will work well for serving plate or luncheon plate. Not sure, but I like it.

Jan. 21 (Peggy):

I love going to thrift and antique stores. I love looking for the hidden gem that is just exactly what I’m looking for…and sometimes what I’m not looking for. What I like is more likely to be in my price range when I’m at a thrift store then an antique store, especially since I am very much into mid-century modern.

Yesterday I went thrifting with my new neighbor. I was looking for, of course, items that would fit into my mid-century modern theme.

The first items I found weren’t on my list but they were items that I just had to have: a beautiful 13 ½ inch cast iron skillet and an almost new bread machine.

The skillet had very little rust on it and it didn’t take much to me to get it all off when I got home. A short soak in super how water, a good scrubbing with a copper pad, and some additional scrubbing with salt and a sponge and it was ready to be seasoned. A little oil and an hour in the over and it was ready! Update: The first thing I cooked in the pan was a rib-eye steak. The only other pans I have are non-stick, so the cast iron skillet let me get a really great sear on the outside before finishing it off in the oven.

The bread machine was in really good shape, like I said it looked like it was almost brand new. It didn’t have the owner’s manual/recipe book, but I figured I could download it once I got home. The bread pan was a little dirty but a quick soak and scrub and it was good to go. I’m really looking forward to making my own bread. Update: A few days later, my neighbor found the exact same bread machine at a Goodwill store on the other side of town. Her’s came with the manual/recipe book. So, I didn’t have to download the book, I just copied hers. I picked out a couple of bread recipes I wanted to make and went to the grocery store to get the ingredients. I mean, I don’t even have flour in my pantry. The first load I made was Country French bread. It was delicious!

The next item I found was an interesting wine glass. I have a collection of wine glasses with no two being the same. I mean, I really don’t have any pairs of matching wine glasses let alone an entire matching set. It certainly makes it easy to recognize your glass during a party. This one has an almost bronzy color on the outside. It was the only one and I snapped it up. There were three matching champagne glasses but I wasn’t interested in them. I just don’t drink a lot of champagne.

The other items I found were things that would be perfect in my new décor. I found two platters that look like they came directly from the 50’s and 60’s, an atomic looking fruit bowl (which I may end up changing the color and hanging on the wall), a very inexpensive vase that’s plastic but I love the shape, and a kitschy ceramic butterfly candy dish (which also may end up on the wall). Update: I ended up painting the vase copper and I really like it better now.

Update: I found a few more pieces of this stainless steel serving dishes (see above).

Update: This is now hanging on my wall. Love it! You can see a picture in Personalizing My Picture Frames.

I am so looking forward to my next trip!

Cart Update

Posted on February 4, 2017March 30, 2017 by vpdairies

I really, really, really needed to update the look of my apartment. I had a bunch of older, mismatched stuff. It definitely did not look the apartment of a grown up.

As I started looking around, I realized that with apartment living you really shouldn’t have a lot of heavy furniture. From being in other people’s apartments who had big, bulky, poufy furniture, the place just looked smaller and more crowded. So, for the average size apartment (and depending on the layout), you need to limit what size, bulk, and amount of your furniture and accessories.

After looking at a lot of pictures online, I decided I love Mid-Century Modern. I love the colors. I love the lines of the furniture. And in an apartment, it provides a cleaner, more spacious look. So, I started looking for pieces and discovered it can be really expensive. I mean, really expensive! There was no way I was going to be able to afford to buy mid-century modern furniture.

I needed to change my way of thinking and find other ways to find the mid-century modern furniture I wanted, while not busting my paycheck. The answer? Thrift stores, craigslist, garage sales, and lots of elbow grease.

So, I started looking at craigslist almost every day. Very often I would find something I liked…usually when I didn’t have any money or it was still out of my price range. And if I had the money, I’d contact the person and it would already be gone.

I also started haunting thrift stores, especially Goodwill and the Salvation Army. I’m always reading these online stories about how amazing it is what people give away. To hear them talk about it, they are always finding some rare piece of art or whatever. Can I just say, I have not had that kind of luck. I have found a few things that will go well in a mid-century modern décor. Candlesticks. A plate. (Not much, huh?)

I did find one item that I’m really excited about. I found it at a thrift store run by a church. It was a really nice place, everything was organized and clean. That’s where I found the plate. I also found some wine glasses for $1 or less. The wine glasses aren’t necessarily mid-century modern but they are big and that is the most important thing when picking out wine glasses. But the thing I found that really excited me is a cart. It will look absolutely perfect on my patio.

It is pretty cool. And you wouldn’t believe what it cost?!? Yes, that’s right, just $7.50.

Now, admittedly it needs some work but isn’t that what Rust-Oleum is for? So, my next stop was Home Depot to look at spray point. Man, there are a lot of colors. I ended up going with Satin Lagoon for the shelves and Metallic Silver for the handles. I’m not sure that the Satin Lagoon is really a mid-century modern color but I like it and think it will look fantastic. I’m not sold on the Metallic Silver, which is really just chrome, but it was the only type of silver at the store. I’m going to go ahead and use it…and if I don’t like it, I’ll just buy another shade of silver, hopefully there will be something else in stock by then or at a different store.

So, it looks like I’m all ready to get going on my little project.

Check out Card Redo, Part 2 to see how that goes.